1-Wire sensors portfolio
The KS/B-1W
Cable probe measures the temperature in the range of -55 up to +125°C in gasiform or liquid medium and converts the measured value into a digital output signal. The resolution of the conversion is configurable from 9-bit to 12-bit (0,5/0,25/0,125/0,0625 K). The 1-Wire protocol allows a cost efficient wiring of multiple sensing devices as series, ring or tree topology in 2- or 3-wire connection. Optionally, each device has a serial number label, whereby a quick and easy start-up is possible. The stainless steel sleeve protects the sensor e.g. against mechanical impacts, is with the cable moisture sealed rolled and can be mounted by an immersion sleeve, tension band or compression clamp.
The LF2/B-1W
Cable sensor measures the surface temperature from pipes in the range of -30 up to +110°C and converts the measured value into a digital output signal. The resolution of the conversion is configurable from 9-bit to 12-bit (0,5/0,25/0,125/0,0625 K). The 1-Wire protocol allows a cost efficient wiring of multiple sensing devices as series, ring or tree topology in 2- or 3-wire connection. Optionally, each device has a serial number label, whereby a quick and easy start-up is possible. By the in scope of delivery stainless steel clamping band the aluminium block at the housing bottom side can be mounted fast and safe directly e.g. on cold and hot water pipes of heating installation. The robust housing allows the use in rough environment conditions.
The RF/B-1W
Indoor sensor in modern housing design measures the temperature in the range of -30 up to +60°C in gasiform medium and converts the measured value into a digital output signal. The resolution of the conversion is configurable from 9-bit to 12-bit (0,5/0,25/0,125/0,0625 K). The 1-Wire protocol allows a cost efficient wiring of multiple sensing devices as series, ring or tree topology in 2- or 3-wire connection. Optionally, each device has a serial number label, whereby a quick and easy start-up is possible. The temperature probe can be mounted directly on-wall by 2 fixing screws. The extra large air vents ensure an optimal ventilation as well as a high measurement accuracy.
