It is a clear goal for EnergyCare to support open systems – because it can incorporate a variety of devices, protocols and have the best possibilities to fit in to an existing system at minimum of cost. That is the reason to select Niagara AX Supervisor from Tridium. The AX Supervisor® is designed to support a variety of devices and protocols into a common and integrated building automation system based on a open – interoperable systems. EnergyCare and Tridium Niagara shows the way in open systems.



  • MIX series I/O_FI

    The product group of I/O modules MINI series has been designed to complement the I/O modules of the MIX series. Unlike the MIX series, the MINI line is dedicated to all the applications where hand operating switches are required. Also, the MINI line products’ light-controlling algorithm makes them applicable as lighting controllers. Very much like in case of the MIX modules, the modules are factory-equipped with the two most popular open communication protocols: Modbus (ASCII, RTU, TCP/IP) and BACnet (MSTP, IP), which are selected using DIP switches. There are two versions of the modules, namely: modules with interface RS485, and modules with interfaces 1x Ethernet and RS485.


  • MAX series I/O

    The product group of I/O modules MINI series has been designed to complement the I/O modules of the MIX series. Unlike the MIX series, the MINI line is dedicated to all the applications where hand operating switches are required. Also, the MINI line products’ light-controlling algorithm makes them applicable as lighting controllers. Very much like in case of the MIX modules, the modules are factory-equipped with the two most popular open communication protocols: Modbus (ASCII, RTU, TCP/IP) and BACnet (MSTP, IP), which are selected using DIP switches. There are two versions of the modules, namely: modules with interface RS485, and modules with interfaces 1x Ethernet and RS485.


  • MIX series I/O

    The product group of I/O modules MINI series has been designed to complement the I/O modules of the MIX series. Unlike the MIX series, the MINI line is dedicated to all the applications where hand operating switches are required. Also, the MINI line products’ light-controlling algorithm makes them applicable as lighting controllers. Very much like in case of the MIX modules, the modules are factory-equipped with the two most popular open communication protocols: Modbus (ASCII, RTU, TCP/IP) and BACnet (MSTP, IP), which are selected using DIP switches. There are two versions of the modules, namely: modules with interface RS485, and modules with interfaces 1x Ethernet and RS485.



  • IO-R-16/34

    The product group of I/O modules MINI series has been designed to complement the I/O modules of the MIX series. Unlike the MIX series, the MINI line is dedicated to all the applications where hand operating switches are required. Also, the MINI line products’ light-controlling algorithm makes them applicable as lighting controllers. Very much like in case of the MIX modules, the modules are factory-equipped with the two most popular open communication protocols: Modbus (ASCII, RTU, TCP/IP) and BACnet (MSTP, IP), which are selected using DIP switches. There are two versions of the modules, namely: modules with interface RS485, and modules with interfaces 1x Ethernet and RS485.


  • Trend driver

    JACE 3E & 6E are powerful, open and flexible controllers that supports the AX supervisor software and can be expanded with several I/O modules. The JACE series bring full flexibility in to the Niagara AX.


  • Genibus driver

    JACE 3E & 6E are powerful, open and flexible controllers that supports the AX supervisor software and can be expanded with several I/O modules. The JACE series bring full flexibility in to the Niagara AX.


  • Satchwell Micronet driver

    JACE 3E & 6E are powerful, open and flexible controllers that supports the AX supervisor software and can be expanded with several I/O modules. The JACE series bring full flexibility in to the Niagara AX.


  • Weather station driver for Niagara

    JACE 3E & 6E are powerful, open and flexible controllers that supports the AX supervisor software and can be expanded with several I/O modules. The JACE series bring full flexibility in to the Niagara AX.


  • Siemens Desigo PX driver

    JACE 3E & 6E are powerful, open and flexible controllers that supports the AX supervisor software and can be expanded with several I/O modules. The JACE series bring full flexibility in to the Niagara AX.


  • Schneider electric TAC Xenta driver

    JACE 3E & 6E are powerful, open and flexible controllers that supports the AX supervisor software and can be expanded with several I/O modules. The JACE series bring full flexibility in to the Niagara AX.


  • Sauter driver

    JACE 3E & 6E are powerful, open and flexible controllers that supports the AX supervisor software and can be expanded with several I/O modules. The JACE series bring full flexibility in to the Niagara AX.


  • Dali Smart Link – DSL Master

    JACE 3E & 6E are powerful, open and flexible controllers that supports the AX supervisor software and can be expanded with several I/O modules. The JACE series bring full flexibility in to the Niagara AX.


  • Tridium JACE 8000 Controller

    JACE 3E & 6E are powerful, open and flexible controllers that supports the AX supervisor software and can be expanded with several I/O modules. The JACE series bring full flexibility in to the Niagara AX.


  • Tridium Ndio

    Tridium JACE plug-in I/O modules provides up to 66 points in one controller. Plug-in DIN rail mounted modules: ▪ 16 point I/O – 8xUI, 4xAO, 4xDO ▪ 34 point I/O – 16xUI, 8xAO, 10xDO


  • Tridium JACE 3E/6E Controller

    JACE 3E & 6E are powerful, open and flexible controllers that supports the AX supervisor software and can be expanded with several I/O modules. The JACE series bring full flexibility in to the Niagara AX.



  • MAC 36

    The product group of I/O modules MINI series has been designed to complement the I/O modules of the MIX series. Unlike the MIX series, the MINI line is dedicated to all the applications where hand operating switches are required. Also, the MINI line products’ light-controlling algorithm makes them applicable as lighting controllers. Very much like in case of the MIX modules, the modules are factory-equipped with the two most popular open communication protocols: Modbus (ASCII, RTU, TCP/IP) and BACnet (MSTP, IP), which are selected using DIP switches. There are two versions of the modules, namely: modules with interface RS485, and modules with interfaces 1x Ethernet and RS485.


  • MAC 36 Se

    The product group of I/O modules MINI series has been designed to complement the I/O modules of the MIX series. Unlike the MIX series, the MINI line is dedicated to all the applications where hand operating switches are required. Also, the MINI line products’ light-controlling algorithm makes them applicable as lighting controllers. Very much like in case of the MIX modules, the modules are factory-equipped with the two most popular open communication protocols: Modbus (ASCII, RTU, TCP/IP) and BACnet (MSTP, IP), which are selected using DIP switches. There are two versions of the modules, namely: modules with interface RS485, and modules with interfaces 1x Ethernet and RS485.


  • TP Touch Point

    The product group of I/O modules MINI series has been designed to complement the I/O modules of the MIX series. Unlike the MIX series, the MINI line is dedicated to all the applications where hand operating switches are required. Also, the MINI line products’ light-controlling algorithm makes them applicable as lighting controllers. Very much like in case of the MIX modules, the modules are factory-equipped with the two most popular open communication protocols: Modbus (ASCII, RTU, TCP/IP) and BACnet (MSTP, IP), which are selected using DIP switches. There are two versions of the modules, namely: modules with interface RS485, and modules with interfaces 1x Ethernet and RS485.


  • RAC18-IP Controller

    The product group of I/O modules MINI series has been designed to complement the I/O modules of the MIX series. Unlike the MIX series, the MINI line is dedicated to all the applications where hand operating switches are required. Also, the MINI line products’ light-controlling algorithm makes them applicable as lighting controllers. Very much like in case of the MIX modules, the modules are factory-equipped with the two most popular open communication protocols: Modbus (ASCII, RTU, TCP/IP) and BACnet (MSTP, IP), which are selected using DIP switches. There are two versions of the modules, namely: modules with interface RS485, and modules with interfaces 1x Ethernet and RS485.


  • 2D Light Controller

    The product group of I/O modules MINI series has been designed to complement the I/O modules of the MIX series. Unlike the MIX series, the MINI line is dedicated to all the applications where hand operating switches are required. Also, the MINI line products’ light-controlling algorithm makes them applicable as lighting controllers. Very much like in case of the MIX modules, the modules are factory-equipped with the two most popular open communication protocols: Modbus (ASCII, RTU, TCP/IP) and BACnet (MSTP, IP), which are selected using DIP switches. There are two versions of the modules, namely: modules with interface RS485, and modules with interfaces 1x Ethernet and RS485.


  • SMS Modem

    The product group of I/O modules MINI series has been designed to complement the I/O modules of the MIX series. Unlike the MIX series, the MINI line is dedicated to all the applications where hand operating switches are required. Also, the MINI line products’ light-controlling algorithm makes them applicable as lighting controllers. Very much like in case of the MIX modules, the modules are factory-equipped with the two most popular open communication protocols: Modbus (ASCII, RTU, TCP/IP) and BACnet (MSTP, IP), which are selected using DIP switches. There are two versions of the modules, namely: modules with interface RS485, and modules with interfaces 1x Ethernet and RS485.


  • PA-10C-B1

    The product group of I/O modules MINI series has been designed to complement the I/O modules of the MIX series. Unlike the MIX series, the MINI line is dedicated to all the applications where hand operating switches are required. Also, the MINI line products’ light-controlling algorithm makes them applicable as lighting controllers. Very much like in case of the MIX modules, the modules are factory-equipped with the two most popular open communication protocols: Modbus (ASCII, RTU, TCP/IP) and BACnet (MSTP, IP), which are selected using DIP switches. There are two versions of the modules, namely: modules with interface RS485, and modules with interfaces 1x Ethernet and RS485.


  • Edge-10-E

    The product group of I/O modules MINI series has been designed to complement the I/O modules of the MIX series. Unlike the MIX series, the MINI line is dedicated to all the applications where hand operating switches are required. Also, the MINI line products’ light-controlling algorithm makes them applicable as lighting controllers. Very much like in case of the MIX modules, the modules are factory-equipped with the two most popular open communication protocols: Modbus (ASCII, RTU, TCP/IP) and BACnet (MSTP, IP), which are selected using DIP switches. There are two versions of the modules, namely: modules with interface RS485, and modules with interfaces 1x Ethernet and RS485.


  • MAC 36

    The product group of I/O modules MINI series has been designed to complement the I/O modules of the MIX series. Unlike the MIX series, the MINI line is dedicated to all the applications where hand operating switches are required. Also, the MINI line products’ light-controlling algorithm makes them applicable as lighting controllers. Very much like in case of the MIX modules, the modules are factory-equipped with the two most popular open communication protocols: Modbus (ASCII, RTU, TCP/IP) and BACnet (MSTP, IP), which are selected using DIP switches. There are two versions of the modules, namely: modules with interface RS485, and modules with interfaces 1x Ethernet and RS485.


  • ECY-303 Controller

    The product group of I/O modules MINI series has been designed to complement the I/O modules of the MIX series. Unlike the MIX series, the MINI line is dedicated to all the applications where hand operating switches are required. Also, the MINI line products’ light-controlling algorithm makes them applicable as lighting controllers. Very much like in case of the MIX modules, the modules are factory-equipped with the two most popular open communication protocols: Modbus (ASCII, RTU, TCP/IP) and BACnet (MSTP, IP), which are selected using DIP switches. There are two versions of the modules, namely: modules with interface RS485, and modules with interfaces 1x Ethernet and RS485.


  • ECY-VAV Controller

    The product group of I/O modules MINI series has been designed to complement the I/O modules of the MIX series. Unlike the MIX series, the MINI line is dedicated to all the applications where hand operating switches are required. Also, the MINI line products’ light-controlling algorithm makes them applicable as lighting controllers. Very much like in case of the MIX modules, the modules are factory-equipped with the two most popular open communication protocols: Modbus (ASCII, RTU, TCP/IP) and BACnet (MSTP, IP), which are selected using DIP switches. There are two versions of the modules, namely: modules with interface RS485, and modules with interfaces 1x Ethernet and RS485.


  • ECLYPSE Wi-Fi

    The product group of I/O modules MINI series has been designed to complement the I/O modules of the MIX series. Unlike the MIX series, the MINI line is dedicated to all the applications where hand operating switches are required. Also, the MINI line products’ light-controlling algorithm makes them applicable as lighting controllers. Very much like in case of the MIX modules, the modules are factory-equipped with the two most popular open communication protocols: Modbus (ASCII, RTU, TCP/IP) and BACnet (MSTP, IP), which are selected using DIP switches. There are two versions of the modules, namely: modules with interface RS485, and modules with interfaces 1x Ethernet and RS485.


  • ECY-S1000 Controller

    The product group of I/O modules MINI series has been designed to complement the I/O modules of the MIX series. Unlike the MIX series, the MINI line is dedicated to all the applications where hand operating switches are required. Also, the MINI line products’ light-controlling algorithm makes them applicable as lighting controllers. Very much like in case of the MIX modules, the modules are factory-equipped with the two most popular open communication protocols: Modbus (ASCII, RTU, TCP/IP) and BACnet (MSTP, IP), which are selected using DIP switches. There are two versions of the modules, namely: modules with interface RS485, and modules with interfaces 1x Ethernet and RS485.


  • EC-Smart-Vue

    The product group of I/O modules MINI series has been designed to complement the I/O modules of the MIX series. Unlike the MIX series, the MINI line is dedicated to all the applications where hand operating switches are required. Also, the MINI line products’ light-controlling algorithm makes them applicable as lighting controllers. Very much like in case of the MIX modules, the modules are factory-equipped with the two most popular open communication protocols: Modbus (ASCII, RTU, TCP/IP) and BACnet (MSTP, IP), which are selected using DIP switches. There are two versions of the modules, namely: modules with interface RS485, and modules with interfaces 1x Ethernet and RS485.


  • ECY-PTU Controller

    The product group of I/O modules MINI series has been designed to complement the I/O modules of the MIX series. Unlike the MIX series, the MINI line is dedicated to all the applications where hand operating switches are required. Also, the MINI line products’ light-controlling algorithm makes them applicable as lighting controllers. Very much like in case of the MIX modules, the modules are factory-equipped with the two most popular open communication protocols: Modbus (ASCII, RTU, TCP/IP) and BACnet (MSTP, IP), which are selected using DIP switches. There are two versions of the modules, namely: modules with interface RS485, and modules with interfaces 1x Ethernet and RS485.


  • Meter gateway

    The product group of I/O modules MINI series has been designed to complement the I/O modules of the MIX series. Unlike the MIX series, the MINI line is dedicated to all the applications where hand operating switches are required. Also, the MINI line products’ light-controlling algorithm makes them applicable as lighting controllers. Very much like in case of the MIX modules, the modules are factory-equipped with the two most popular open communication protocols: Modbus (ASCII, RTU, TCP/IP) and BACnet (MSTP, IP), which are selected using DIP switches. There are two versions of the modules, namely: modules with interface RS485, and modules with interfaces 1x Ethernet and RS485.


  • FCU Controller

    The product group of I/O modules MINI series has been designed to complement the I/O modules of the MIX series. Unlike the MIX series, the MINI line is dedicated to all the applications where hand operating switches are required. Also, the MINI line products’ light-controlling algorithm makes them applicable as lighting controllers. Very much like in case of the MIX modules, the modules are factory-equipped with the two most popular open communication protocols: Modbus (ASCII, RTU, TCP/IP) and BACnet (MSTP, IP), which are selected using DIP switches. There are two versions of the modules, namely: modules with interface RS485, and modules with interfaces 1x Ethernet and RS485.


  • Sedona AAC20 Series

    The product group of I/O modules MINI series has been designed to complement the I/O modules of the MIX series. Unlike the MIX series, the MINI line is dedicated to all the applications where hand operating switches are required. Also, the MINI line products’ light-controlling algorithm makes them applicable as lighting controllers. Very much like in case of the MIX modules, the modules are factory-equipped with the two most popular open communication protocols: Modbus (ASCII, RTU, TCP/IP) and BACnet (MSTP, IP), which are selected using DIP switches. There are two versions of the modules, namely: modules with interface RS485, and modules with interfaces 1x Ethernet and RS485.



  • Relay Modules old

    I/O Modules are an integral product range in EnergyCare’s portfolio and provide a flexible and cost effective means to expand the input and output functionality of any BMS controller. Renowned for their quality and reliability, they incorporate added features that make them easier to install and commission.